No-baked resins curing with acid hardeners, Alkaline phenolic resins curing with ester or CO2 or methylformiate, Phenolic-Urethane binders are commonly used in the foundry for moulds and cores
EUSKATFUND offers a wide range of system no-bake personalized and ecological , appropriate to each type of casting, as curing time, the different types of sand (new or reclaimed), with high mechanical strength, which give an excellent surface smoothness the pieces.
The range of furan resins offered by EUSKATFUND allows to optain excellent mechanical strength, getting with very low binder additions . The possibility of working with systems very reactive for the best performance in the Fast Loop mould handling system, as well as more slowed systems to work large moulds, with difficult attacked, in extreme conditions temperature. Special mention are line of furan resins with no Nitrogen, no Formaldehyde, no p...
Resin range URSET not contain nitrogen or sulfur, resulting particularly suitable for cast iron, nodular and aluminum. Not being an exothermic system minimizes the problem of hot crack in the steel foundry. This system provides an excellent stripping. Emissions, both during molding and melting are very low. The process has no harmful or irritating odors, improving workplace. We have resins soda base suitable to work with mechanically reclaim san...
Read more about alkaline phenolic resins
The Phenolic Urethane system allows high productivity, optimizing the maximum life of bank relative to the curing curve . Low gas evolution and very acceptable odor levels. Good fluidity of the sand due to the low viscosity of the resins, which allows to obtain good surface finish of the castings. Free from Sulphur and Phosphorus....